Robust and strong single tank devices with multi-frequency technology
Elmasonic xtra ST floor-mounted ultrasonic devices are designed for use in a production environment, workshops and servicing. The wide range of features makes it easy and effective to work with these devices.
Multi-frequency at 25/45 kHz: Individually settable frequencies depending on the cleaning job.
Sweep-function for optimum sound field distribution and cleaning performance in the entire ultrasonic bath.
Switchable Pulse-function increases the peak ultrasonic performance output. This uprating makes it possible to remove even the most stubborn contaminants.
Dynamic-function: The Sweep- and Pulse-functions run alternately on an automatic basis. The ultrasonic performance is temporarily increased by up to 20%. At the same time, the even ultrasonic sound field distribution in the ultrasonic bath enhances the cleaning effect.
Short heating times due to the high heating capacity with temperature regulation (30 - 80°C)
Easy to service due to quick changing of the generator and operator control unit. This means that the devices are ready for use again very quickly and are highly available for users.
Elmasonic xtra ST devices are rated for continuous operation under the highest operational demands. The tanks are made of special stainless steel, which makes them robust with a long service life. In single-shift operation, they are guaranteed a warranty period of three years.
TECHNICAL FEATURES
|
xtra ST 300H |
xtra ST 500H | xtra ST 600H | xtra ST 800H | xtra ST1400H | xtra ST 1600H |
xtra ST 1900S
|
xtra ST 2500H | |
| Ultrasonic frequency (kHZ) | 25/45 | 25/45 | 25/45 | 25/45 | 25/45 | 25/45 | 25/45 | 25/45 |
| Tank labour capacity (l) | 22.0 | 42.0 | 45.0 | 70.0 | 97.0 | 133.0 | 134.0 | 215.0 |
| Max.tank capacity (l) | 30.0 | 50.0 | 58.0 | 83.0 | 125.0 | 162.0 | 187.0 | 255.0 |
| Ultrasonic power effective - Normal,Pulse (W) | 480 | 540/600 | 800/900 | 900/1000 | 1440 | 1600/1800 | 1000 | 1600/1800 |
| Ultrasonic power effective-Dynamic (W) | 600 | 600 | 1000 | 1000 | 1800 | 2000 | 1000 | 2000 |
| Heating power (W) | 1400 | 1400 | 1400 | 4200 | 5000 | 7500 | 2300 | 7500 |
| Unit external dimensions W/D/H(mm) | 500/550/935 | 500/550/935 | 670/580/935 | 670/580/935 | 885/850/935 | 885/850/935 | 615/900/940 | 1035/900/935 |
| Tank internal dimensionsW/D/H (mm) | 330/300/300 | 330/300/500 | 500/330/350 | 500/330/500 | 600/600/350 | 600/600/450 | 410/650/520 | 750/650/520 |
| Max.basket loading(kg) | 12.0 | 12.0 | 25.0 | 40.0 | 50.0 | 50.0 | 40.0 | 50.0 |
| Basket internal dimensions W/D/H (mm) | 255/230/170 | 255/230/370 | 400/255/220 | 400/255/370 | 490/525/210 | 480/525/300 | 360/560/240 | 630/575/370 |
| Weight (kg) | 40.0 | 45.0 | 55.0 | 61.0 | 87.0 | 93.0 | 75.0 | 107.0 |
Elmasonic xtra ST Accessories
Always holistic and system-oriented. Elma is redefining ultrasonic cleaning.
The peripherals and accessories for the Elmasonic xtra ST take the entire cleaning process to a new level. They not only increase productivity in the cleaning process – their consistent use also significantly reduces operating costs, increases user-friendliness and protects the environment.
Elma Move
Oscillation makes it possible to utilise the full power of ultrasound for optimum cleaning results.
With Elma Move, the cleaning basket moves vertically through the ultrasonic bath at a rate of nine strokes per minute. In ultrasonic baths, alternating areas of uneven ultrasonic exposure are formed due to the underlying physics. If the items to be cleaned are moved cyclically through these zones with Elma Move, a maximum homogeneous cleaning effect is achieved. The basket can be loaded with up to 35 kg of items to be cleaned. Elma Move is available in different sizes for all units from the Elmasonic xtra ST 300H to the Elmasonic xtra ST 2500H*. Existing Elmasonic xtra ST devices can be easily retrofitted.
Elma Filter
Longer bath service life. Minimised tank wear. Higher productivity with lower operating costs.
With a flow rate of 400 litres/h, the self-suction pump with high availability runs continuously during ultrasonic operation. At the same time, the flow is continuously monitored. The contaminated cleaning bath (including fine particles) is extracted and cleaned via the filter. The cleaned liquid is returned directly to the bath and if the filter needs to be changed this is indicated. The standard filter cartridges (10 inches) can be easily replaced without a service technician. The advantages are obvious as continuous filtration increases the service life of the cleaning bath. The cleaning bath needs to be emptied and replenished significantly less often, which leads to considerable savings in terms of water consumption and the purchase of cleaning chemicals. By removing particles from the bottom of the tank, it is better protected against erosion. This significantly increases the service life of the tank. The filtered particles can be collected in a targeted manner and recycled, which is particularly advantageous in the case of precious metals.
Elma Table
Ever practical. Always ergonomic. Flexible cleaning processes.
With the Elma Table, you are no longer slowed down by physically separate pre-cleaning and drying processes. After pre-cleaning, the items to be cleaned can be lifted directly from the Elma Table into the ultrasonic bath at the same working height. As soon as cleaning in the Elmasonic xtra ST is complete, the items can be ergonomically lifted onto the Elma Table for cooling, rinsing or drying. The Elma Table is available in three different sizes, including two devices for mobile use and one for tabletop operation. The device can be positioned to the left or the right of the Elmasonic xtra ST as required thanks to the castors. Depending on how the Elma Table is set up, the splash guard can be easily adjusted at any time. The drip tray has a 3/8-inch drain and is easy to clean thanks to the removable drip trays. The Elma Table is made of high-quality V2A stainless steel and is easy to clean. The Elma Table is simple and easy to set up.
Elma Rinse
With Elma Rinse, rinsing with DM water couldn’t be easier. Before and after ultrasonic cleaning
Elma Rinse can be easily integrated into the Elma Table. Alternatively, it can also be mounted to the wall or on a table. The two hand showers are each operated with municipal water or demineralised (DM) water. The hand showers each have 2.3-metre-long hoses and swivel couplings, so they offer maximum flexibility during the rinsing process. The included cartridge for demineralised water can be replaced accordingly and has a capacity of 1,300 litres at a water hardness of 330 μS/cm. Elma Rinse has a flow rate of 300 litres per hour. Elma Rinse increases the quality of the cleaning results with spotless cleaning
PUT US TO THE TEST
We can try our solutions to your surface finishing and cleaning problems together. We will evaluate the results and make suggestions about your problems on surface finishing and cleaning processes.
Send us some sample, we will transmit you the results and our suggestions in the form of a process report.